- Motorcycle Transmissions[1]
- Housings[1]
- Other Bearing Accessories[1]
- Angular Contact Ball Bearings[10]
- Ceramic Ball Bearing[2]
- Deep Groove Ball Bearings[10]
- Other Ball Bearings[1]
- Self-aligning Ball Bearings[10]
- Thrust Ball Bearings[10]
- Linear Bearings[10]
- Needle Bearings[10]
- Other Bearings[5]
- Pillow Block Bearings[7]
- Rod End Bearings[10]
- Cylindrical Roller Bearings[10]
- Other Roller Bearings[3]
- Spherical Roller Bearings[10]
- Taper Roller Bearings[10]
- Thrust Roller Bearings[7]
- Special Bearings[1]
- Seals[2]
- Contact Person : Ms. Gao Eileen
- Company Name : Wuxi Guangyue Bearing Co., Ltd.
- Tel : 86-510-82619610
- Fax : 86-510-82610897
- Address : Jiangsu,Wuxi,Room2111, Jinma Building, No.638, Xingyuan North Road, Wuxi, Jiangsu,China.
- Country/Region : China
- Zip : 214000
Pillow Block Bearing UCP212
Related Product Searches:Pillow Block Bearing UCP212,High Quality,Pillow Block Bearing UCP212, Insert ball bearings,UCP212
Pillow Block Bearing UCP212
Pillow block bearings manufacturer
Leading distributor of SKF, NSK, NTN, KOYO etc.
Insert ball bearing of deep groove ball bearings is actually a variant, is characterized by its outer diameter surface of the sphere, can be blended with a corresponding concave spherical bearing in mind the role played tune.
Although its basic properties and deep groove ball bearings should be similar, but because of this relatively rough bearing most of the machinery used in the installation orientation is not precise enough, the hole axis and the seat of the neutral axis of difference, or long-axis deflection the case of large, etc., and also bearing their accuracy is not high enough, some structure is relatively rough, so compare the actual performance of the same performance specifications deep groove ball bearings Yaoda quite a discount. For example: with the top wire of the outer spherical ball bearings used in large stiffness difference through shaft deflections, such bearings with seals on both sides, to close to prevent dirt intrusion, the factory had the right amount of lubricant filling.
Before installation without washing, without injecting lubricant of the bearing protruding wire screw terminal on the top of the shaft are tightened. Permissible dynamic axial load shall not exceed the rated load of 20%.
Pillow Block Bearing UCP212
